Product Description
- Mirafit M200S Short Power Rack
- With an overall height of just six feet tall this rack is ideal for garages or rooms with low ceilings
- The rack features the same fantastic spec as our regular M200, just with shorter uprights
- For customers who have no height limitations we recommend the standard M200. Please see notes below in relation to usability
- Powder coated finish in a choice of black or orange
- Full length safety spotters with UHMW liners - protects against barbell damage
- J-Cups with UHMW liners
- Strong 60mm x 60mm steel frame
- Steel thickness ranges from 2mm right up to 6mm
- 6mm thick steel brace plates on all uprights
- Fully adjustable - 14 levels
- 1" diameter holes spaced at 8cm intervals
- Bolt down feet for extra stability
- Rear base bar position provides increased room for weight bench positioning within the cage
- Straight grip pull up bar
- Pull up bar diameter: 32mm with matt black finish.
- Suitable for use with a 7ft or 6ft international barbell. Please note this cage is too wide for a standard 6ft barbell
- Compatible with a range of attachments (see below)
- The foot plates are pre-drilled with 11mm diameter holes but floor fixings are NOT included and will vary depending on your floor type.
- Specification:
- Total Height: 183cm
- Total Width: 147cm (122cm to outside of uprights)
- Total Depth: 141cm
- Internal Depth: 74cm
- Frame: 60mm X 60mm
- Net weight: 80kg / 176lbs
- Max load: 350kg
How usable is the M200S given the shorter height?
- This depends on the height of the user and the way the rack is setup
- The height to the underside of the rear cross bar is 171cm and the height to the underside of the pull up bar is 173cm
- For taller users this can cause issues with pullups and upright exercises such as squats. In particular with squats there is the consideration of how to rack the bar without hitting your head. Consider these options:
- Option 1 - You can increase clearance under the pull up bar to approximately 180cm by buying the optional multi-grip pull up bar
- Option 2 - The pull up bar can be fitted slightly further back in the cage to create some more room at the front. Combine option 1 and 2 for an even greater impact
- Option 3 - The pull up bar can be left out entirely. With this setup we recommend a max load of 280kg
- Note: Cable pulley system is not compatible with this rack
Delivery & Assembly
- This product is delivered in 3 boxes
- The courier will often not deliver all of the boxes at the same time. Please wait at least 48 hours for the other boxes to arrive before contacting us
- Assembly instructions are included
- During assembly pay special attention to the rear base bar which has two sets of holes. Ensure you follow the assembly diagrams to use the correct set of holes otherwise this will cause alignment issues. The spare holes are in place to accommodate optional weight storage poles.